- EDWARDS Small Dry Pumps
- EDWARDS Acoustic Enclosures
- EDWARDS Chemical & Process Pumps
- EDWARDS Industrial Dry Pump
- EDWARDS Mechanical Boosters
- EDWARDS Oil Vapor Diffusion Pumps
- Diffstak Vapour Pumps
- Standard Diffstak 100/300M Vapour Pump
- Standard Diffstak 100/300P Vapour Pump
- Standard Diffstak 160/700M Vapour Pump
- Standard Diffstak 160/700P Vapour Pump
- Standard Diffstak 250/2000M Vapour Pump
- Standard Diffstak 250/2000P Vapour Pump
- Standard Diffstak 63/150M Vapour Pump
- Standard Diffstak 63/150P Vapour Pump
- Unvalved Diffstak 100/300C Vapour Pump
- Unvalved Diffstak 100/300F Vapour Pump
- Unvalved Diffstak 160/700C Vapour Pump
- Unvalved Diffstak 160/700F Vapour Pump
- Unvalved Diffstak 250/2000C Vapour Pump
- Unvalved Diffstak 63/150C Vapour Pump
- View All
- High Throughput Diffusion Pumps
- Vapour Booster Pumps
- View All
- Diffstak Vapour Pumps
- EDWARDS Semiconductor Dry Pumps
- EDWARDS Turbomolecular Pumps
- HTC Adapter Fittings
- HTC Aluminum Block Valve
- All in one HV aluminum angle valve
- Aluminum angle valve manual with bellows
- Aluminum angle valve manual without formed bellows
- Aluminum angle valve pneumatic double-acting with bellows sensor
- Aluminum angle valve pneumatic single-acting with bellows solenoid
- Aluminum angle valve with sensor
- N.C. HV aluminum angle valve
- Pneumatic normally open single with bellows & sensor
- Pneumatic normally open single with bellows, sensor & solenoid
- View All
- HTC Bakeable All Metal Valve
- HTC Ball Valve
- HTC Centering Ring
- HTC Check Valve
- HTC Elbows-Tees-Crosses
- HTC Gate Valves
- HTC Hydroformend Vacuum Bellows
- HTC Pneumatic Butterfly Valve
- HTC Pneumatic Pendulum Valve
- HTC Teflon Coating Vacuum Valve
- HTC Transfer gate Valve and doors
- HTC Vacuum Accessories
- HTC Vacuum Clamps
- HTC Vacuum Feedthrough
- HTC Vacuum Flanges
- HTC Vacuum Poppet Valves
- HTC Vacuum Valve Kit
- HTC Vacuum Viewport
- HTC Venting Valve
Glovac Sdn Bhd
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
+603-7980 3721
+603-7980 3612
EDP400 60 Hz, Bareshaft Pump A70541000
Previous | 2 / 2 | Next |
Overview:
EDP pumps are based on Edwards’ oil-free, non-contacting, award-winning, reverse claw mechanism. They provide consistent vacuum at high efficiencies and low costs of ownership. Dry pumps completely eliminate all problems of process contamination and creation of polluted effluent, which are experienced with traditional wet vacuum pump technologies.
Features & Benefits:
Technical Data:
EDP pumps are based on Edwards’ oil-free, non-contacting, award-winning, reverse claw mechanism. They provide consistent vacuum at high efficiencies and low costs of ownership. Dry pumps completely eliminate all problems of process contamination and creation of polluted effluent, which are experienced with traditional wet vacuum pump technologies.
Features & Benefits:
- Staged compression for optimum temperature profile within the pump and no requirement for cooling gas injection
- Inherently free draining
- Able to handle liquid or particulate carryover
- Short gas path eliminates particulate build-up and corrosion - Edwards’ patented design
- Can flush with solvents, water or steam
- No internal valves to block or corrode and no interstage condensers to create potential for corrosion
- Simple robust construction with ample power ensures reliable operation even during process upsets
- Non-contacting mechanisms gives long life and high reliability
- Pump flammable gases safely
- Pump corrosive gases without corroding
- Designed for long life and easy maintenance - Minimum of 25 years life expectancy
- Lower cost of ownership
Technical Data:
Maximum pumping speed | |
50 Hz | 377 m3h-1 / 222 ft3min-1 |
60 Hz | 427 m3h-1 / 251 ft3min-1 |
Capacity at 10 mbar (7.5 Torr) | |
50 Hz | 377 m3h-1 / 222 ft3min-1 |
50 Hz | 422 m3h-1 / 248 ft3min-1 |
Ultimate vacuum | |
50 Hz | 0.4 mbar / 0.3 Torr |
60 Hz | 0.2 mbar / 0.2 Torr |
Maximum back pressure | |
Standard | 1150 mbar / 2.2 psig |
Power consumption at 10 mbar (7.5 Torr) | |
50 Hz | 7.0 kW / 9.4 hp |
60 Hz | 7.0 kW / 9.4 hp |
Standard motor (380 – 400 V, 3 ph, 50 Hz) | |
50 Hz | 18.5 kW |
60 Hz | 25.0 kW |
Standard motor (200 – 460 V, 3 ph, 60 Hz) | |
50 Hz | 25.0 hp |
60 Hz | 30.0 hp |
Cooling water flow rate (adjustable) | |
50 Hz | 1 – 10 l min-1 / 0.3 – 2.6 gal min-1 |
60 Hz | 1 – 10 l min-1 / 0.3 – 2.7 gal min-1 |
Cooling water supply pressure | 2 – 10 barg / 29 – 145 psig |
Seal purge flow (maximum), regulated to 0.3 - 0.5 barg (5 – 7 psig) |
20 l min-1 / 0.7 ft3min-1 |
Seal purge supply pressure (minimum - maximum) |
2 – 10 barg / 29 – 145 psig |
Noise (max. with exhaust silencer) | |
50 Hz | 82 dB(A) |
60 Hz | 82 dB(A) |
Weight (with frame and standard motor) | |
50 Hz | 918 kg / 2024 lbs |
60 Hz | 960 kg / 2116 lbs |
Inlet | 3’’ ANSI / DN80 |
Outlet | 2’’ ANSI / DN50 |
Pumping mechanism | 3 stage reversed claw |