- EDWARDS Small Dry Pumps
- EDWARDS Acoustic Enclosures
- EDWARDS Chemical & Process Pumps
- EDWARDS Industrial Dry Pump
- EDWARDS Mechanical Boosters
- EDWARDS Oil Vapor Diffusion Pumps
- Diffstak Vapour Pumps
- Standard Diffstak 100/300M Vapour Pump
- Standard Diffstak 100/300P Vapour Pump
- Standard Diffstak 160/700M Vapour Pump
- Standard Diffstak 160/700P Vapour Pump
- Standard Diffstak 250/2000M Vapour Pump
- Standard Diffstak 250/2000P Vapour Pump
- Standard Diffstak 63/150M Vapour Pump
- Standard Diffstak 63/150P Vapour Pump
- Unvalved Diffstak 100/300C Vapour Pump
- Unvalved Diffstak 100/300F Vapour Pump
- Unvalved Diffstak 160/700C Vapour Pump
- Unvalved Diffstak 160/700F Vapour Pump
- Unvalved Diffstak 250/2000C Vapour Pump
- Unvalved Diffstak 63/150C Vapour Pump
- View All
- High Throughput Diffusion Pumps
- Vapour Booster Pumps
- View All
- Diffstak Vapour Pumps
- EDWARDS Semiconductor Dry Pumps
- EDWARDS Turbomolecular Pumps
- HTC Adapter Fittings
- HTC Aluminum Block Valve
- All in one HV aluminum angle valve
- Aluminum angle valve manual with bellows
- Aluminum angle valve manual without formed bellows
- Aluminum angle valve pneumatic double-acting with bellows sensor
- Aluminum angle valve pneumatic single-acting with bellows solenoid
- Aluminum angle valve with sensor
- N.C. HV aluminum angle valve
- Pneumatic normally open single with bellows & sensor
- Pneumatic normally open single with bellows, sensor & solenoid
- View All
- HTC Bakeable All Metal Valve
- HTC Ball Valve
- HTC Centering Ring
- HTC Check Valve
- HTC Elbows-Tees-Crosses
- HTC Gate Valves
- HTC Hydroformend Vacuum Bellows
- HTC Pneumatic Butterfly Valve
- HTC Pneumatic Pendulum Valve
- HTC Teflon Coating Vacuum Valve
- HTC Transfer gate Valve and doors
- HTC Vacuum Accessories
- HTC Vacuum Clamps
- HTC Vacuum Feedthrough
- HTC Vacuum Flanges
- HTC Vacuum Poppet Valves
- HTC Vacuum Valve Kit
- HTC Vacuum Viewport
- HTC Venting Valve
Glovac Sdn Bhd
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
+603-7980 3721
+603-7980 3612
EH4200 HC IE3 Asia 60HZ 200V 60HZ, 380V 60HZ A30906934
Previous | 6 / 9 | Next |
Overview:
The EH mechanical booster pumps feature the unique hydrokinetic drive, providing an efficient power transmission with benefits in economy, performance and compactness. The hydrokinetic drive provides pump down times cut by 50%, when compared with direct drive pumps, no bypass lines or pressure switches required, universal voltage motors, reduced capital and operating costs, air cooled motors – with water cooled options, and quiet, minimum vibration.
The EH mechanical booster pumps, based on the simple Roots principle, remain the favourite pumps for applications where high pumping speeds over 3000 m3h‑1/1776 ft3min-1 are required in the pressure region of 0.01 to 50 mbar/0.0075 to 37.5 Torr. These must always be backed by another pump which can deliver against a high pressure differential to atmospheric pressure. Operating at relatively low pressures, the mechanical booster pump is not exposed to the same concentrations of corrosive process media as is the backing pump, which makes it highly reliable.
Features & Benefits:
- Performance – fast pump down time due to unique hydrokinetic drive.
- Increased productivity – faster pump down time.
- More performance for less – larger displacement than equivalent competitor models.
- Stable operation – optimised clearances and after coolers.
- Simplicity – Continuous operation at all pressures.
- Simple installation – no need for pressure switches, bypass lines or variable frequency drives.
- Reliability – automatic overload protection, reliable shaft seal design.
- Safe operation – automatic overload protection.
- Robust operation even for harsh duties – proven shaft seal design to protect pumping mechanism and gearbox from cross-contamination.
- High uptime and low maintenance – internal evacuation of gearboxes extends shaft seal life.
- Reassurance.
- Peace of mind – industry proven with large installed base.
Technical Data:
Hydrocarbon Prepared – HC
Standard pump for use with Ultragrade oil. Oil supplied with the pump
PFPE Prepared - FX
These pumps are assembled and tested using PFPE fluid. PFPE (Fomblin®) to be purchased separately
The EH mechanical booster pumps feature the unique hydrokinetic drive, providing an efficient power transmission with benefits in economy, performance and compactness. The hydrokinetic drive provides pump down times cut by 50%, when compared with direct drive pumps, no bypass lines or pressure switches required, universal voltage motors, reduced capital and operating costs, air cooled motors – with water cooled options, and quiet, minimum vibration.
The EH mechanical booster pumps, based on the simple Roots principle, remain the favourite pumps for applications where high pumping speeds over 3000 m3h‑1/1776 ft3min-1 are required in the pressure region of 0.01 to 50 mbar/0.0075 to 37.5 Torr. These must always be backed by another pump which can deliver against a high pressure differential to atmospheric pressure. Operating at relatively low pressures, the mechanical booster pump is not exposed to the same concentrations of corrosive process media as is the backing pump, which makes it highly reliable.
Features & Benefits:
- Performance – fast pump down time due to unique hydrokinetic drive.
- Increased productivity – faster pump down time.
- More performance for less – larger displacement than equivalent competitor models.
- Stable operation – optimised clearances and after coolers.
- Simplicity – Continuous operation at all pressures.
- Simple installation – no need for pressure switches, bypass lines or variable frequency drives.
- Reliability – automatic overload protection, reliable shaft seal design.
- Safe operation – automatic overload protection.
- Robust operation even for harsh duties – proven shaft seal design to protect pumping mechanism and gearbox from cross-contamination.
- High uptime and low maintenance – internal evacuation of gearboxes extends shaft seal life.
- Reassurance.
- Peace of mind – industry proven with large installed base.
Technical Data:
Displacement (swept volume) | |
50Hz | 4140 m3h-1 / 2440 ft3min-1 |
60Hz | 4985 m3h-1 / 2935 ft3min-1 |
Effective pumping speed with backing pump | |
E2M275 | 3100 m3h-1 / 1825 ft3min-1 |
Pressure differential across pump | |
50Hz | |
HC | 0-70 mbar / 0-52 Torr |
FX | 0-60 mbar / 0-46 Torr |
60Hz | |
HC / FX | 0-50 mbar / 0-38 Torr |
Inlet connection | ISO250 |
Outlet connection | ISO100 |
Rotational speed | |
50Hz | 0-2900 rpm |
60Hz | 0-3500 rpm |
Operating continuous inlet pressure | 0-1000 mbar / 0-760 Torr |
Maximum outlet pressure | 1000 mbar / 760 Torr |
Recommended backing pumps | GXS450, E2M275, ES300, ES630, 412J, IDX1000, IDX1300 |
Motor power | |
Hydrocarbon | 11kW / 15hp |
PFPE | 11kW / 15hp |
ATEX | 11kW |
Explosion proof | 15hp |
Ambient temperature range | |
Operating | 5 to 40°C / 40 to 104°F |
Storage | -20 to 80°C / 14 to 176°F |
Maximum operating humidity | 90% RH |
Recommended cooling water flow (inlet temperature 20°C) | 6 lmin-1 |
Recommended cooling water supply pressure | 2-6 barg |
Cooling water connections | 3/8 inch BSP male |
Recommended oil | |
Standard version | Ultragrade 20 |
PFPE version | Fomblin® YVAC 16/6 |
Oil capacity | |
Gear case | 3.5 litre |
Coupling cover | 6.5 litre |
Shaft seal reservoir | 0.45 litre |
Weight | 409 kg / 900 lb |
Hydrocarbon Prepared – HC
Standard pump for use with Ultragrade oil. Oil supplied with the pump
PFPE Prepared - FX
These pumps are assembled and tested using PFPE fluid. PFPE (Fomblin®) to be purchased separately