- EDWARDS Small Dry Pumps
- EDWARDS Acoustic Enclosures
- EDWARDS Chemical & Process Pumps
- EDWARDS Industrial Dry Pump
- EDWARDS Mechanical Boosters
- EDWARDS Oil Vapor Diffusion Pumps
- Diffstak Vapour Pumps
- Standard Diffstak 100/300M Vapour Pump
- Standard Diffstak 100/300P Vapour Pump
- Standard Diffstak 160/700M Vapour Pump
- Standard Diffstak 160/700P Vapour Pump
- Standard Diffstak 250/2000M Vapour Pump
- Standard Diffstak 250/2000P Vapour Pump
- Standard Diffstak 63/150M Vapour Pump
- Standard Diffstak 63/150P Vapour Pump
- Unvalved Diffstak 100/300C Vapour Pump
- Unvalved Diffstak 100/300F Vapour Pump
- Unvalved Diffstak 160/700C Vapour Pump
- Unvalved Diffstak 160/700F Vapour Pump
- Unvalved Diffstak 250/2000C Vapour Pump
- Unvalved Diffstak 63/150C Vapour Pump
- View All
- High Throughput Diffusion Pumps
- Vapour Booster Pumps
- View All
- Diffstak Vapour Pumps
- EDWARDS Semiconductor Dry Pumps
- EDWARDS Turbomolecular Pumps
- HTC Adapter Fittings
- HTC Aluminum Block Valve
- All in one HV aluminum angle valve
- Aluminum angle valve manual with bellows
- Aluminum angle valve manual without formed bellows
- Aluminum angle valve pneumatic double-acting with bellows sensor
- Aluminum angle valve pneumatic single-acting with bellows solenoid
- Aluminum angle valve with sensor
- N.C. HV aluminum angle valve
- Pneumatic normally open single with bellows & sensor
- Pneumatic normally open single with bellows, sensor & solenoid
- View All
- HTC Bakeable All Metal Valve
- HTC Ball Valve
- HTC Centering Ring
- HTC Check Valve
- HTC Elbows-Tees-Crosses
- HTC Gate Valves
- HTC Hydroformend Vacuum Bellows
- HTC Pneumatic Butterfly Valve
- HTC Pneumatic Pendulum Valve
- HTC Teflon Coating Vacuum Valve
- HTC Transfer gate Valve and doors
- HTC Vacuum Accessories
- HTC Vacuum Clamps
- HTC Vacuum Feedthrough
- HTC Vacuum Flanges
- HTC Vacuum Poppet Valves
- HTC Vacuum Valve Kit
- HTC Vacuum Viewport
- HTC Venting Valve
Glovac Sdn Bhd
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
11/11A, Jalan Perisa 2,
Happy Garden,
58200 Kuala Lumpur,
Malaysia.
+603-7980 3721
+603-7980 3612
615 5HR (Bare shaft) Horizontal flow 9006155HR
Previous | 7 / 8 | Next |
Overview:
Edwards Process Isolation Boosters are designed to be used in conjunction with rotary-piston, liquid ring, rotary vane and dry vacuum pumps to increase pumping speed at working pressures and shorten pump down time significantly. The Process Isolation Boosters can be mounted separately or on the inlet of the backing pump to create a compact integrated package.
Featuring an extra large diameter shaft, the 6” Process Isolation Boosters has the capability for use with higher powered motors in addition to ensuring a uniquely rugged and durable mechanical booster. This allows the pumps to operate at their full displacement from atmospheric pressure with an appropriately sized backing pump.
In addition to these standard features, the Process Isolation Boosters have 5 mechanical shaft seals for optimum protection from dust and particulate contamination in arduous duty applications.
The Process Isolation Boosters must be backed by a primary vacuum pump designed to discharge to atmospheric pressure. Examples of suitable backing pumps are listed below:
GV Drystar or Chemical Drystar dry pumps
Two stage LR series liquid ring pumps
RV, EM or EVC oil sealed pumps
Microvac series piston pumps
The bare shaft Superblower should be connected to a suitable V belt or direct drive motor. Contact Edwards for advice.
Features & Benefits:
Technical Data:
Edwards Process Isolation Boosters are designed to be used in conjunction with rotary-piston, liquid ring, rotary vane and dry vacuum pumps to increase pumping speed at working pressures and shorten pump down time significantly. The Process Isolation Boosters can be mounted separately or on the inlet of the backing pump to create a compact integrated package.
Featuring an extra large diameter shaft, the 6” Process Isolation Boosters has the capability for use with higher powered motors in addition to ensuring a uniquely rugged and durable mechanical booster. This allows the pumps to operate at their full displacement from atmospheric pressure with an appropriately sized backing pump.
In addition to these standard features, the Process Isolation Boosters have 5 mechanical shaft seals for optimum protection from dust and particulate contamination in arduous duty applications.
The Process Isolation Boosters must be backed by a primary vacuum pump designed to discharge to atmospheric pressure. Examples of suitable backing pumps are listed below:
GV Drystar or Chemical Drystar dry pumps
Two stage LR series liquid ring pumps
RV, EM or EVC oil sealed pumps
Microvac series piston pumps
The bare shaft Superblower should be connected to a suitable V belt or direct drive motor. Contact Edwards for advice.
Features & Benefits:
- 5 Mechanical shaft seals offer improved life and serviceability and prevent contamination from dust and particulates
- Ringfeder® keyless gear locking system provides stronger, faster timing
- Drive end roller bearing which resists belt pull and thermal effects
- Over-sized anti-friction bearings allows increased uptime and longer service intervals
- Horizontal gas flow configuration
- Direct drive capability
- Rugged proven design and construction
- Large shaft diameters allowing improved performance at high pressures
- Quiet operation
- Unique impeller design which is dynamically balanced to minimize vibration
- High volumetric efficiency
- High differential pressure offering operation capability
Technical Data:
Horizontal flow | Vertical flow | |
Displacement V belt (2750 rpm) | 3375m3h-1 / 2000ft3min-1 | 3375m3h-1 / 2000ft3min-1 |
Displacement direct drive (3600 rpm) | 4420m3h-1 / 2600ft3min-1 | 4420m3h-1 / 2600ft3min-1 |
Inlet/outlet flanges | 8” ASA/ANSI flange | 8” ASA/ANSI flange |
Motor option US TEFC | 15hp | 15hp |
Cooling water | 7.6-11.4 l min-1 / 2-3 gal min-1 | 7.6-11.4 l min-1 / 2-3 gal min-1 |
Oil capacity | 1.9liter / 0.51gal | 4.1liter / 1.1gal |
Max pressure differential | 506mbar / 380Torr | 506mbar / 380Torr |
Max temp rise | 135°C / 275°F | 135°C / 275°F |
Max discharge temp | 191°C / 375°F | 191°C / 375°F |
Foot print TEFC direct drive (L x W x H) | 1369 x 406 x 543mm / 53.9x 16 x 21.4in | 1369 x 543 x 406mm / 53.9 x 21.4 x 16in |
Weight TEFC direct drive | 397kg / 875lbs | 397kg / 875lbs |